Coats

Ladieswear - Polo Shirts

We offer a range of sewing threads which are fine with high levels of strength to eliminate costly needle damage during the manufacture of polo shirts.

Polyester corespun threads are recommended for the overlock and coverseam looper elements, but if you favor textured polyester, we recommend Gramax Tex 18.

Approximate thread consumption is 120 meters. Alternative thread types may be used depending on required final quality. The thread size will determine the choice of needle size.

For more information, check out our recommendations below.

Take the next step

Contact one of our experts to find out more information.

Application guide

We can tailor the product application guide to show you the exact information you require, please select the necessary options from the filter below. Below are recommended stitch types for this end use item.

    Loading ...

    Disclaimer

    In order to avoid damage to the fabric during the sewing of knitted garments, ball point needles are generally recommended.

    Where two Tex sizes of thread have been suggested the choice will be determined by the demands of the stitching operation, the amount of load / demand placed on the seam and the type and weight of fabric being sewn.

    The sewing thread recommendations laid out above are intended as a guide to aid the construction of garments with good quality seams. As garments of the same generic type differ in terms of fabric substrate and construction, and both making up methods and post make up processing can greatly vary, these recommendations should be viewed as a good starting point for thread selection.

    Garment specific recommendations for thread and needle selection as well as accurate thread consumption figures and on-site technical support can be obtained by contacting your local Coats' office.

    These recommendations and consumption figures are intended as a guide only and are given in good faith but without warranty or liability on the company or its employees.