Registered users can place Bulk Orders . Contact local Coats office for registration.
Here is an example of a 2 or 3 year wash/finish, most liked washed countless of times. Garments like these would not have been washed much to start off with, so you’d get high contrast whiskers. But repeated washing after this has led to a great foundation of abrasion marks. The darkness of the fabric is still just about visible inside the seams edges and you can see many roping effects on the hem and side seams. There is higher contrast round the waistband and on the back pockets – the whiskers have started to naturally blend with the garment . Details like belts loops are starting to pop in a exciting way. When you find real garments which are worn down like this, you would start to see small abrasion marks forming round the front pockets and knees areas. We at ENDRIME® Studio love playing with colour combinations – as this garment wash was going to be a heavy bleach like finish, we decided to use two Coats colours C9308 (light grey) and C8167 (Ecru) as the main thread colours. These colours blend better into these kind of high bleach base colour of a finish. You would often find thread colour combinations like these in 1970s/early 80s denim garments.
Additional Information:
Style Hand made by ENDRIME® Studio in West Sussex
Fabric used: Orta # 4291A-45 – Indigo Warp / White Weft – 80% Cotton 20% Post-consumer recycled cotton
Washed by experts at Jeanologia – with a Low EIM rating of 21 – made using a combination of Laser, G2 Pre-ozonic 10’, Enzyme 30’, eFlow atmos 08, ATMOSPHERIC 30’, Acid enzyme, Bleach Flow, Neutralization and eFlow Softening
This jean has been hand made by ENDRIME® Studio in West Sussex, using the very best Turkish Orta denim fabrics and the most advanced Sustainable washing treatments by the experts in Jeanologia Spain. The jean has been single needle tailored, with a combination of TEX 30, 60 and 90 thread. with a combination of two thread colours.
Details inculde:
3D beltloops with string inside for extra dualbilty and strength.
3/16″ edge stitch on Centre front fly opening
Fly stitch sewn with 1/8 twin needle stitch – going to single point.
Front Fly sewn with 1877 Neustadter Brothers Patented “Boss of the Road” one-piece continuous fly construction.
Front pockets sewn with 1/4” single needle edge stitch
Run and fell clean construction seams 1/4” and 5/16” (single needle tailored)
Chainstitch buttonholes sewn with a Reece 101 – Iron duke machine
Waistband stitch sewn with chainstitch with a Kansai Special machine.
Bottom of back pockets sewn with extra fabric for reinforcement fabric
Hem sewn with Union Special 43200G Bulldog machine, which creates vintage roping effect once washed.
Coats printed woven label – dyed with plant based Ink.
Coats leather patched hand stamped with plant based Ink.
Coats Screw on Buttons 29L made by Jawaid Bross – Unfinished Silver Colour
Unbranded Washer and Burr rivets in either, Sliver, Copper or Gunmetal finish
Registered users can place Sample Orders . Contact local Coats office for registration.
Registered users can place Bulk Orders . Contact local Coats office for registration.
Registered users can place Sample Orders . Contact local Coats office for registration.
Registered users can place Bulk Orders . Contact local Coats office for registration.