Opti M Regular
Classic metal zips with special profile metal teeth
Standard metal zips are manufactured using bead technology, where profile metal elements (teeth) are clamped on woven and dyed textile tape; brass wire is usually used to make the teeth.
Precision cutting and stapling processes are followed by multiple brushing and polishing operations, to ensure that the M zip runs smoothly.
Textile tapes are usually made from polyester, but can be made from cotton when the zips are applied in post dyed garments.
Coats commit to following environmental and health and safety legislations in regards to ensuring zips do not contain heavy metals. All standard Coats Opti zips are conformed to these requirements. However if a customer requires zips with the use of heavy metal, Coats would apply careful precautions to supply the products.
Discover how Opti M can enhance the quality of your products. Download our product datasheets or contact one of our experts.
- Leather Wear
- Luggage and travel goods
- Outdoor Wear
- Sports and activewear
|Close End||Open End||Two Way Open End||TWCE O-form||TWCE X-form||Continuous Chain|
Metal zips used on leather goods may exhibit a change in the metal finish, due to chemical agents applied on the leather which are not properly washed away or neutralised after tanning.
Chemicals used in garment dyeing and bleaching may cause a change in colour of the metal zip elements or result in a stain migration problem.
Metal zips that undergo severe denim washes (enzyme and stone wash) may be affected by chemical and physical abrasion.
Prior to bulk production, Coats Opti recommends that tests and trials are carried out on all zip uses/applications in order to verify that the product meets end customer requirements and the demands of internal processing conditions. Coats Opti supports customers with advice on individual applications on request; if you have any questions or concerns, please contact us.