It consists of a patent pending formulation of strontium nitrate photoluminescent pigments and clear microscopic glass beads applied on a dimensionally stable, durable, multi-layered film. It also features a permanent pressure sensitive adhesive with a PET backing sheet.
Coats Signal Lucence Self-Adhesive offers a third layer of visibility and it works when there is no primary light source or reduced light.
The photoluminescent material absorbs both natural and artificial UV light through electron excitation which it then emits as an afterglow in low light or zero light. Each time Coats Lucence material is exposed to UV light it will recharge with no need for batteries.
Features and Benefits
- Has a short charging time. UV light charging times vary depending on the type of light but typically a day light charge will take 5 minutes and a charge in overhead fluorescent light ten minutes
- Features a long afterglow which lasts over 8 hours with the first hour being the brightest
- Testing shows the phosphorescent pigments work for 20 years
Main uses
- Footwear
- Accessories e.g. safety helmets, tools
- Marking tape
- Emergency signage
- Can be cut, suitable for digital and screen printing to produce signs and markings
- Suitable for application onto the following substrates; glass, metal, acrylic, painted surfaces, polycarbonate, fibreglass, correx, foamboard, composite materials such as dibond
Main uses
- Footwear
- Accessories e.g. safety helmets, tools
- Marking tape
- Emergency signage
- Can be cut, suitable for digital and screen printing to produce signs and markings
- Suitable for application onto the following substrates; glass, metal, acrylic, painted surfaces, polycarbonate, fibreglass, correx, foamboard, composite materials such as dibond
Main uses
- Footwear
- Accessories e.g. safety helmets, tools
- Marking tape
- Emergency signage
- Can be cut, suitable for digital and screen printing to produce signs and markings
- Suitable for application onto the following substrates; glass, metal, acrylic, painted surfaces, polycarbonate, fibreglass, correx, foamboard, composite materials such as dibond
Signal Lucence Sew-on Tapes
A range of high performance phosphorescent sew-on tapes for workwear, PPE, general apparel and accessories.
Read moreSignal Lucence Heat Transfer
A phosphorescent and reflective film that can be cut in stripes for logos or bespoke designs and fused on garments.
Read moreSignal Lucence Self-Adhesive
A range of self-adhesive phosphorescent material which can be applied on footwear and accessories such as safety helmets and tooling.
Read moreDisclaimer
Since conditions and applications vary considerably in the use of product, user should assure herself or himself by preliminary testing that the product is suitable for the end use intended.