COA: 77.77 GBp
translate icon
Home • Footwear • Slippers
Slippers

Slippers

Our sewing threads have a high strength to volume ratio, offering optimal sewability and can enhance slippers by being used in decorative stitching.

For more information, check out our recommendations below.

Application guide

We can tailor the product application guide to show you the exact information you require, please select the necessary options from the filter below. Below are recommended stitch types for this end use item.

Threads_0
Garment category Machine type Stitch type Stitch rating per 3cm Needle thread Under thread Needle size Nm
- Back Closing 301 Coats® Gral™ Coats® Gral™
Tex 60 Tex 60
Ticket 40 Ticket 40
Garment category Machine type Stitch type Stitch rating per 3cm Needle thread Under thread Needle size Nm
- Aprons / Vamp 301 Coats® Gral™ Coats® Gral™
Tex 45 Tex 45
Ticket 60 Ticket 60
Garment category Machine type Stitch type Stitch rating per 3cm Needle thread Under thread Needle size Nm
- Lining 301 Coats® Gral™ Coats® Gral™
Tex 45 Tex 45
Ticket 60 Ticket 60
Garment category Machine type Stitch type Stitch rating per 3cm Needle thread Under thread Needle size Nm
- Side Wall 301 Coats® Gral™ Coats® Gral™
Tex 135 Tex 135
Ticket 20 Ticket 20

Recommended Sustainable Products

Coats has a wide range of sustainable and eco-friendly sewing threads, yarns, zips and trims.
Sylko
Coats® EcoVerde™ Sylko™

100% recycled trilobal polyester thread for machine embroidery

More details
Sylko
Coats® EcoVerde™ Sylko™ Matt
More details
Gral
Coats® EcoVerde™ Gral™

A lubricated polyester thread made from 100% recycled pre-stabilised high tenacity continous filament polyester.

More details

Disclaimer

Since conditions and applications vary considerably in the use of the thread, Coats and its distributors can make no guarantee of results. These recommendations are given in good faith but without warranty or liability on the company or its employees. The thread user should assure herself or himself by preliminarily testing that the thread is suitable for the end use intended. Technical information listed above is based on current averages and should be taken only as indicative.